Envisor® Unit attached screening systems offer a way to meet municipal code compliance without disrupting the roof membrane.
The trusses will mount directly to the corners and sides of the HVAC cabinet. Rail systems will mount to the trusses and panels will be inserted into the sliding rails to provide equipment access. See out installation guide for more details.
Proper screening systems will have adequate clearance to provide airflow around the units, typically 36"- 48". Metal panels offer perforated or louvered options to increase airflow as well.
We have had a licensed engineer stamp product drawings to meet 180-mph wind load requirements with some product modifications. Generally, our engineers allow for an ultimate wind load of 115-mph. In high wind load areas, it is required for unit attached screens to be four sided. In Florida and Hawaii Beachfront projects within 1500 ft of the water must be Post-Mounted. To meet wind load requirements any metal panel may be chosen but the only approved ABS panel style is vertical rib.
Maintenance work can become more complicated when technicians must dismantle screen sections to reach the equipment. When choosing a rooftop screening system, make sure maintenance access will not be disrupted. Envisor's patented design features panels able to slide to open to provide easy maintenance access for the equipment. When choosing a rooftop screening system, make sure maintenance access will not be disrupted
Yes, however, the RTUs must be positioned close enough to each other to allow for “nesting". To conceal/nest two more units within one united-attached screen system - all 5 of the following criteria must be met:
1) units must be able to be concealed with a unit-attached screen system
2) units must be of similar height (less 6" difference)
3) units must be in line (less than 12" offset)
4) units must be less than 96" apart
5) units must not be on vibration isolation springs /curbs
Envisor® screening systems offer a variety of options to accommodate any roof plan all while avoiding roof penetration. Discuss your roof plan with a project manager to find the best solution for your project.