FAQs for Unit Attached Rooftop Equipment Screening
Article Summary
- Commercial HVAC units especially on large office buildings or hotels often feature ductwork that can be an obstacle when chosing a form of roof screening
- Post-mounted solutions are good for enclosing ductwork and equipment, but are timely and costly to install especially after roof construction has been completed.
- Unit-attached screening systems offer a variety of easy modifications for ductwork, including partial screening, removing panels, or cut-outs.
- Work with a project manager to find the best screening solution for your roof plan
Envisor® Unit attached screening systems offer a way to meet municipal code compliance without disrupting the roof membrane.

1. How does the system attach to the unit cabinet?
The trusses will mount directly to the corners and sides of the HVAC cabinet. Rail systems will mount to the trusses and panels will be inserted into the sliding rails to provide equipment access. See out installation guide for more details.
2. Do unit attached screens rooftop screens block airflow to HVAC equipment?
Proper screening systems will have adequate clearance to provide airflow around the units, typically 36"- 48". Metal panels offer perforated or louvered options to increase airflow as well.
3. What are the wind load specifications of unit attached screening?
We have had a licensed engineer stamp product drawings to meet 180-mph wind load requirements with some product modifications. Generally, our engineers allow for an ultimate wind load of 115-mph. In high wind load areas, it is required for unit attached screens to be four sided. In Florida and Hawaii Beachfront projects within 1500 ft of the water must be Post-Mounted. To meet wind load requirements any metal panel may be chosen but the only approved ABS panel style is vertical rib.
4. Is maintenance access affected by a unit attached rooftop screen system?
Maintenance work can become more complicated when technicians must dismantle screen sections to reach the equipment. When choosing a rooftop screening system, make sure maintenance access will not be disrupted. Envisor's patented design features panels able to slide to open to provide easy maintenance access for the equipment. When choosing a rooftop screening system, make sure maintenance access will not be disrupted
5. Can I screen multiple pieces of rooftop equipment together with a unit attached screen?
Yes, however, the RTUs must be positioned close enough to each other to allow for “nesting". To conceal/nest two more units within one united-attached screen system - all 5 of the following criteria must be met:
1) units must be able to be concealed with a unit-attached screen system
2) units must be of similar height (less 6" difference)
3) units must be in line (less than 12" offset)
4) units must be less than 96" apart
5) units must not be on vibration isolation springs /curbs
Envisor® screening systems offer a variety of options to accommodate any roof plan all while avoiding roof penetration. Discuss your roof plan with a project manager to find the best solution for your project.